Sennheiser GP ID 3200OUT

Đặc điểm nổi bật Thông số kỹ thuật Thông số kỹ thuật Hỏi đáp và tư vấn

Thông số kỹ thuật

Cat. No. 500897: (GP ID 3200-OUT)	identifier for outdoor installation or use in humid environments
Dimensions	130 mm x 130 mm x 52mm
Weight	approx. 450 g (without batteries)
Protection class	IP65
Temperature range	0°C to +55°C
Power supply	4 x 1.5 V alkaline manganese battery (AA size) or via external 7.5 – 15 VDC power supply
Operating time	≥ 3 months with four AA size 1.5 V batteries (at 100 % transmitting power, 1 s repetition rate, with an internal antenna and a daily operating time of 8 hrs)
Max. current consumption	≤ 10 mA (with an external loop antenna or during trigger operation)
Interface.	Infra-red interface: for communication with a 3Com PalmTop
Internal connection terminals.	for an external DC power supply for an external switch (for trigger operation) for an external loop antenna
Signal strength	adjustable via software, from 100 % to 0 % in steps of 10 %
Frequency	127 kHz
Modulation	FSK (frequency shift keying)
Frequency adjustment.	fixed frequency preset
Max. transmission range	3 m (omni-directional) with internal antenna, with external loop antenna dependent on location

Xem đầy đủ thông số kỹ thuật

I. Giới thiệu Sennheiser GP ID 3200-OUT

Sennheiser GP ID 3200-OUT là Sản phẩm của Thương hiệu Sennheiser thuộc dòng GUIDE PORT SYSTEM SENNHEISER, được nhập khẩu và phân phối chính hãng bởi Thiết Bị Âm Thanh Sân Khấu tại Việt Nam

The signal strength shall be adjustable via software from 100% to 0% in steps of 10%, transmission frequency shall be 127 kHz. Maximum transmission range with an internal antenna shall be 3 m (omni-directional) or, when an external loop antenna is used, shall be dependent on location. Power shall be supplied to the identifier by four 1.5V AA size alkaline manganese batteries or via an external DC power supply (7.5–15V). Total operating time with batteries shall be ≥ 3 months (at 100 % transmitting power, 1 s repetition rate, with an internal antenna and a daily operating time of 8 hours). C

Tính năng sản phẩm Sennheiser GP ID 3200-OUT

For mobile or fixed exhibits
IP 65 housing – waterproof (GP ID 3200-OUT)
External contact for triggering interactive application
An external loop antenna can be connected for especially large exhibits for large exhibits
Battery or mains powered
Can be connected to an external DC power supply (8 – 12V DC)

II. Thông số kĩ thuật Sennheiser GP ID 3200-OUT

Cat. No. 500897: (GP ID 3200-OUT)	identifier for outdoor installation or use in humid environments
Dimensions	130 mm x 130 mm x 52mm
Weight	approx. 450 g (without batteries)
Protection class	IP65
Temperature range	0°C to +55°C
Power supply	4 x 1.5 V alkaline manganese battery (AA size) or via external 7.5 – 15 VDC power supply
Operating time	≥ 3 months with four AA size 1.5 V batteries (at 100 % transmitting power, 1 s repetition rate, with an internal antenna and a daily operating time of 8 hrs)
Max. current consumption	≤ 10 mA (with an external loop antenna or during trigger operation)
Interface.	Infra-red interface: for communication with a 3Com PalmTop
Internal connection terminals.	for an external DC power supply for an external switch (for trigger operation) for an external loop antenna
Signal strength	adjustable via software, from 100 % to 0 % in steps of 10 %
Frequency	127 kHz
Modulation	FSK (frequency shift keying)
Frequency adjustment.	fixed frequency preset
Max. transmission range	3 m (omni-directional) with internal antenna, with external loop antenna dependent on location

>>Sản phẩm liên quan: Pin Sennheiser BA 2015

>>> Tin tức xem thêm: Những lưu ý khi lắp đặt hệ thống âm thanh sân khấu kịch

Đánh giá Sennheiser GP ID 3200-OUT

Đánh giá:

Thông số kỹ thuật