Components |
LF Driver: 1x 10" (254 mm) HF Compression Driver: 1x 1"(25 mm) |
Frequency Response |
55 Hz to 18 kHz, +/-3 dB 50 Hz to 20 kHz, +/-10 dB |
Nominal Dispersion |
90° H x 60° V @ -6 dB points |
Maximum SPL |
126 dB, peak |
Construction |
Injection-molded polypropylene enclosure Recessed carrying handle Integral dual-angle pole mount socket 6x M10 threaded internal rigging points |
Grille |
Powder coated galvanized perforated steel mesh grille with foam backing |
Connectors |
Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot Mix Output: Male XLR wired pin 2 hot IEC mains connector with integrated fuseholder |
Controls |
Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off |
Indicators |
Blue Power LED Green Signal LED Red Limit LED Red Clip LED |
Amplifier |
Type: Class-D Maximum Power Output: 500 W (LF) ; 100 W (HF) Input Sensitivity: -32 dBu (Mic), -2 dBu (Line) Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz Amplifier Protection: Full short circuit, open circuit, thermal |
Mains Voltage |
USA/Canada: 100-120 V~ (T 6.3 A H 250 V) UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V) China: 220-240 V~ (T 3.15 A H 250 V) Japan: 100-120 V~ (T 6.3 A H 250 V) |
Power Consumption |
80 W @1/8 max power |
Dimensions (HxWxD) |
20.6 x 13.0 x 11.6" (522 x 329 x 294 mm) |
Weight |
29.3 lb (13.3 kg) |