| Components |
LF Driver: 1x 12" (304.8 mm)
HF Compression Driver: 1x 1"(25 mm) |
| Frequency Response |
50 Hz to 18 kHz, +/-3 dB
45 Hz to 20 kHz, +/-10 dB |
| Nominal Dispersion |
90° H x 60° V @ -6 dB points |
| Maximum SPL |
128 dB, peak |
| Construction |
Injection-molded polypropylene enclosure
Recessed carrying handle
Integral dual-angle pole mount socket
6x M10 threaded internal rigging points |
| Grille |
Powder coated galvanized perforated steel mesh grille with foam backing |
| Connectors |
Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot
Mix Output: Male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder |
| Controls |
Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off |
| Indicators |
Blue Power LED
Green Signal LED
Red Limit LED
Red Clip LED |
| Amplifier |
Type: Class D
Maximum Power Output: 1,000 W (LF) ; 100 W (HF)
Input Sensitivity: -32 dBu (Mic), -2 dBu (Line)
Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced
Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced
EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz
Amplifier Protection: Full short circuit, open circuit, thermal |
| Mains Voltage |
USA/Canada: 100-120 V~ (T 6.3 A H 250 V)
UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V)
China: 220-240 V~ (T 3.15 A H 250 V)
Japan: 100-120 V~ (T 6.3 A H 250 V) |
| Power Consumption |
140 W @1/8 max power |
| Dimensions (HxWxD) |
24.4 x 15.5 x 13" (620 x 394 x 330 mm) |
| Weight |
45.1 lb (20.5 kg) |