(0 khách hàng Hỏi đáp và tư vấn)
| Xuất xứ |
|
DBX 1215
JBL
12 tháng
Mới 100%
Còn hàng
>Giá chưa bao gồm VAT
Mua Ngay
Giao hàng tận nơi hoặc đến Showroom xem hàng
| Input Connectors | 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
| Input Type | Electronically balanced/unbalanced, RF filtered |
| Input Impedance | Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input | >+21dBu balanced or unbalanced |
| CMRR | >40dB, typically >55dB at 1kHz |
| Output Connectors | 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
| Output Type | Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | Balanced 200 ohm, unbalanced 100 ohm |
| Max Output | >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range |
| Dynamic Range | 109dB; 115dB |
| Signal to Noise Ratio | 90dB, 97dB |
| THD+Noise | <0.005% |
| Interchannel Crosstalk | <-80db, 20Hz to 20kHz |
| Bypass Switch | Bypasses the graphic equalizer section in the signal path |
| Low cut Switch | (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| Range Switch | (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| I/O Meter | 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| Indicators | EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) |
| Operating Voltage | 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| Power Consumption | 24W |
| Power Connector | IEC receptacle |
| Dimensions | 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm) |
| 设备重量 | 8.5 lbs. (3.9 kg) |
| Shipping Weight | 9.5 lbs. (4.3 kg) |
Equalizer DBX 1215 được thiết kế với 2 kênh kép, trang bị 15 band quãng tám trung tâm tần số ISO, tăng đầu vào + / -12 dB phạm vi, và 40Hz/18 dB chuyển đổi cho mỗi bộ lọc cắt quãng tám thấp,nhưng cũng bao gồm các tính năng độc đáo khác.
DBX 1215 nằm trong Series Equalizers DBX 12 của DBX sở hữu thiết kế chính xác nhằm đáp ứng đầy đủ các yêu cầu gắt gao nhất về âm thanh. Equalizer DBX 1215 sử dụng hệ thống căn bằng điện tử cùng các thiết bị lọc RF. Sản phẩm chính là lựa chọn hoàn hảo nhất dành cho hệ thống âm thanh hội trường chuyên nghiệp.
| Input Connectors | 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
| Input Type | Electronically balanced/unbalanced, RF filtered |
| Input Impedance | Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input | >+21dBu balanced or unbalanced |
| CMRR | >40dB, typically >55dB at 1kHz |
| Output Connectors | 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
| Output Type | Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | Balanced 200 ohm, unbalanced 100 ohm |
| Max Output | >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range |
| Dynamic Range | 109dB; 115dB |
| Signal to Noise Ratio | 90dB, 97dB |
| THD+Noise | <0.005% |
| Interchannel Crosstalk | <-80db, 20Hz to 20kHz |
| Bypass Switch | Bypasses the graphic equalizer section in the signal path |
| Low cut Switch | (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| Range Switch | (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| I/O Meter | 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| Indicators | EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) |
| Operating Voltage | 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| Power Consumption | 24W |
| Power Connector | IEC receptacle |
| Dimensions | 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm) |
| 设备重量 | 8.5 lbs. (3.9 kg) |
| Shipping Weight | 9.5 lbs. (4.3 kg) |
Mua Equalizer DBX tại Hà Nội là sự lựa chọn vô cùng thông minh từ âm thanh sân khấu. Chúng tôi tự hào là nhà phân phối thiết bị âm thanh nhập khẩu chất lượng nhất tại Hà Nội.
=>> Xem thêm: Equalizers DBX231S
=>> Xem thêm: Equalizer có quan trọng với dàn âm thanh chuyên nghiệp?
| Input Connectors | 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
| Input Type | Electronically balanced/unbalanced, RF filtered |
| Input Impedance | Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input | >+21dBu balanced or unbalanced |
| CMRR | >40dB, typically >55dB at 1kHz |
| Output Connectors | 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
| Output Type | Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | Balanced 200 ohm, unbalanced 100 ohm |
| Max Output | >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range |
| Dynamic Range | 109dB; 115dB |
| Signal to Noise Ratio | 90dB, 97dB |
| THD+Noise | <0.005% |
| Interchannel Crosstalk | <-80db, 20Hz to 20kHz |
| Bypass Switch | Bypasses the graphic equalizer section in the signal path |
| Low cut Switch | (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| Range Switch | (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| I/O Meter | 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| Indicators | EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) |
| Operating Voltage | 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| Power Consumption | 24W |
| Power Connector | IEC receptacle |
| Dimensions | 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm) |
| 设备重量 | 8.5 lbs. (3.9 kg) |
| Shipping Weight | 9.5 lbs. (4.3 kg) |
>Giá chưa bao gồm VAT
Địa Chỉ 1: 488 Trần Khát Chân, phường Phố Huế, Q. Hai Bà Trưng, Hà Nội
Điện thoại: 024 36 286 033 - 0902.188 .722 ( Mr Văn)
Địa Chỉ 2 : 365 Điện Biên Phủ, P4, Q.3, TP.HCM
Điện thoại: 0903.400.600 - 0909.37.34.74 ( Mr Sử)
